Furuno TZTL12F Operator's Manual page 264

1
Radar
Radar Source (Select the antenna host name.)
Day Background Color (Black, Dark Blue, White)
Night Background Color (Black, Dark Blue)
Echo Color (Multicolor, Green, Yellow)
Rings Interval (Auto, 1, 2, 3, 4, 5, 6, 7, 8, 9)
Show Range Slider (ON, OFF)
Own Ship Icon (ON, OFF)
Bearing Scale Mode (Relative, True)
EBL Reference (True, Relative)
Watchman (5 minutes, 10 minutes, 20 minutes)
Antenna Rotation (Auto, 24 RPM)
Antenna Heading Align (-179.9 - +180.0(
Main Bang Suppression (0 -
Enable Sector (1, 2) Blanking (ON, OFF)
Start Angle*
End Angle*
Longitudinal (from bow) (0 - 3275(ft), 20)
Lateral (-Port) (-320 - 320(ft), 0)
Antenna Height (For DRS: Under 3 m, 3 m - 10 m, Over 10 m)
Auto Tuning*
Tuning Source*
Manual Tuning*
Radar Monitoring (Open the radar monitor window.)
Radar Optimization*
ARPA Advanced Settings (Open the dialog box for ARPA setting.)
TX Channel*
Target Analyzer Mode*
Auto acquire by Doppler*
Set Hardware to Factory Default
Reset Default Settings
Targets
Display Target IDs (ON, OFF)
Hide AIS Targets Farther than ... (1 NM, 2 NM, 3 NM, 6 NM, 12 NM, 18 NM,
24 NM, 48 NM, 84 NM, 96 NM)
Target Icon Size (050 - 200, 100)
Ignore Alarms for AIS Slower than... (0.0 - 9.9(kn), 1)
CPA/TCPA Alarm (ON, OFF)
CPA Alarm Value (0.01 - 99. 99(NM), 0.5)
TCPA Alarm Value (0 - 59(min), 10)
CPA Graphic Display (ON, OFF)
Proximity AIS Target Alarm (ON, OFF)
Proximity AIS Target Alarm Value (0.001 - 5.000 (NM), 0.049)
Buddies List (AIS & DSC) (Open the buddies list.)
Reset Default Settings
1
* Available when [Enable Sector (1, 2) Blanking] is [ON].
* 2 Available when [Auto Tuning] is [OFF].
3
* Not available with radar sensor DRS4D-NXT.
4
* Available with radar sensor DRS4D-NXT.
1
* 5 Available when [TX/STBY] is [ON].
100, 0)
°
1
(0 - 359( ), 0)
°
1 (0 - 359( ), 0)
3
(ON, OFF)
3
(Range1, Range2)
2 / * 3 (-50 - 50, -50)
3 / 5
*
4
(Auto, 1, 2, 3)
4
(Rain, Target)
4 (ON, OFF)
APPENDIX 1 MENU TREE
°
), 0)
AP-7