Furuno TZTL12F Operator's Manual page 245

13. OTHER FUNCTIONS
INSTRUMENTS SETUP section
Menu item
[Engine & Tank
Automatic Setup]
[Engine & Tank
Manual Setup]
[Graphic Instruments
Setup]
Engine & Tank Automatic Setup: The TZTL will automatically detect engines and
tanks connected to the same network. This is the recommended method for setting up
engines and tanks.
Engine & Tank Manual Setup:
Menu Item
[Nickname]
[Used For Propulsion]
[Reset]
Graphic Instruments Setup:
[Graphic Instruments Setup] - [Maximum Boat Speed], [Maximum Wind Speed]
Menu Item
[Maximum Boat Speed]
[Maximum Wind Speed]
Menu Item
[Minimum Depth]
[Maximum Depth]
[Graphic Instruments Setup] - [Sea Surface Temperature]
Menu Item
[Minimum Sea Surface
Temperature]
[Maximum Sea Surface
Temperature]
13-4
Description
See "Engine & Tank Automatic Setup" below.
See "Engine & Tank Automatic Setup" on the next page.
See "Graphic Instruments Setup" below.
Description
Change the nickname for the engine or tank.
Select which engine/tank is used to
calculate the distance which may be
traveled using the remaining fuel. [ON] uses
the engine/tank for calculations, [OFF]
ignores the engine/tank.
Resets the engine/tank details to default
Description
Set the transducer's maximum detectable
speed.
Set the transducer's maximum detectable
speed.
[Graphic Instruments Setup] - [Depth]
Description
Set the transducer's minimum detectable
depth.
Set the transducer's maximum detectable
depth.
Description
Set the transducer's minimum detectable
temperature.
Set the transducer's maximum detectable
temperature.
Options (setting range)
Options (setting range)
[ON], [OFF]
[OK], [Cancel]
Options (setting range)
1 kn to 99 kn
1 kn to 99 kn
Options (setting range)
1 m to 19 m
20 m to 2000 m
Options (setting range)
0.00°C to 99.99°C
0.01°C to 99.99°C