Table of Contents
Advertisement
Basic Transmission Settings
04002000002
Halftone
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
04002020003
preset to HALFTONE = Off.
Press HALFTONE to:
04002050008
Note:
04002070008
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
04002020004
successfully transmitted page with a small
Press STAMP to:
Note:
04002050004
04002070007
04002070005
42
HALFTONE
HALFTONE = Off
When you select HALFTONE, your machine will automatically select Fine Resolution.
STAMP = Off
1. When you store a document in memory, the Verification Stamp will stamp on the document if it is
successfully stored in memory. In this case the Verification Stamp is not a confirmation that the
document was successfully transmitted. If you wish to disable the use of the Verification Stamp
when storing document in memory, change the setting of Fax Parameter No. 28, see page 37.
2. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04, see
page 35.
HALFTONE
HALFTONE = On
mark.
STAMP
STAMP
STAMP = On
Advertisement
Table of Contents
