4. ROUTES
5. Confirm that [New] is selected, and press the ENT/CNTR key to show the route
information.
6. Press the ENT/CNTR key to change the route name.
7. Operate the cursorpad to enter the route name, and press the ENT/CNTR key
(maximum: six characters).
8. Press . Confirm that the cursor is at the right of [Cmnt], and ENT/CNTR key.
9. Operate the cursorpad to enter the comment (maximum: 18 characters).
10. Press to move the cursor to [1], and press the ENT/CNTR key.
11. Confirm that [Add] is selected, and press the ENT/CNTR key.
12. Select [Alpha] or [Distance], and press the ENT/CNTR key to show the waypoint
list.
13. Select the waypoint to add to the route, and press the ENT/CNTR key.
The selected waypoint (as the starting point) is registered to [1].
14. Press to select [2], and press the ENT/CNTR key.
15. Repeat steps 10 through 13 to complete the route.
16. Press the MENU key several times to close the menu.
4-2
->