Step 6: Perform Initial Software Configuration; Enter Configuration Mode; Configure User Accounts And Passwords - Juniper ACX1100 Quick Start Manual

ACX1000 and ACX1100 Universal Access Routers Quick Start

Step 6: Perform Initial Software Configuration

Enter Configuration Mode

Configure User Accounts and Passwords

18
This procedure connects the router to the network but does not enable it to forward
traffic. For complete information about configuring the router to forward traffic, including
examples, see the Junos OS configuration guides.
To configure the software:
Enter Configuration Mode on page 18
Configure User Accounts and Passwords on page 18
Configure System Attributes on page 19
Commit the Configuration on page 19
Verify that the router is powered on.
1.
Log in as the "root" user. There is no password.
2.
Start the CLI.
3.
root# cli
root@>
Enter configuration mode.
4.
cli> configure
[edit]
root@#
For information about using an encrypted password or an SSH public key string (DSA or
RSA), see the Junos OS System Basics Configuration Guide
Add a password to the root administration user account. Enter a clear-text password.
1.
[edit]
root# set system root-authentication plain-text-password
New password: password
Retype new password: password
Create a management console user account.
2.
[edit]
root# set system login user user-name authentication plain-text-password
New Password: password
Retype new password: password
Set the user account class to
3.
[edit]
root@# set system login user user-name class super-user
.
.
super-user
Copyright © 2015, Juniper Networks, Inc.