Application Functions; Fieldbus; Diagnostics - Siemens Sinamics G120 Operating Instructions Manual

Menu
6.3 Parameters

Application functions

This option allows the user direct access to specific
application functions parameters as listed below:
• Technology controller
• Hibernation
• Load torque monitoring
• Digital time switch
• Positioning deceleration ramp
• Wobble function
• Free blocks

Fieldbus

This option allows the user direct access to the parameters
that control and configure the fieldbus communications of the
Inverter. The parameters can be viewed to confirm their
settings and values, they can also be modified if they are not
read-only parameters.

Diagnostics

This option allows the user direct access to the parameters
that monitor the state of the system. The are divided into the
following functional groups:
• Control/status words
• Interconnections
• Faults/alarms
All the parameters under these groupings are read-only and
cannot be modified.
66
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Intelligent Operator Panel (IOP)