Siemens Sinamics G120 Operating Instructions Manual page 30

Wizards
4.1 Example wizard
1.
2.
3.
4.
5.
30
Select "Basic Commissioning..." from the Wizards
menu.
Select "Yes" or "No" to a factory reset.
The factory reset is performed prior to saving all the
parameter changes that have been made during the
basic commissioning process.
Select the Control Mode for the attached motor.
Select the correct Motor Data for your Inverter and
attached motor.
This data is used to calulate the correct speed and
displayed values for the application.
Select the correct frequency for your Inverter and
attached motor.
The use of the 87 Hz characteristic allows the motor to
operate at 1.73 times of its normal speed.
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Intelligent Operator Panel (IOP)