Siemens Sinamics G120 Operating Instructions Manual page 35

3.
4.
5.
6.
7.
8.
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Select the Control Mode for the attached motor.
Select the correct Motor Data for your Inverter and
attached motor.
This data is used to calulate the correct speed and
displayed values for the application.
Select the correct frequency for your Inverter and
attached motor.
The use of the 87 Hz characteristic allows the motor to
operate at 1.73 times of its normal speed.
At this stage the wizard will begin to ask for the data
relating specifically to the attached motor. The data is
obtained from the motor rating plate.
The Motor Data screen indicates the frequency
characteristic of the attached motor.
Input the correct Motor Voltage from the motor rating
plate.
Wizards
4.1 Example wizard
35