Menu
6.3 Parameters
System Information
This screen displays all the parameters that contain system
information regarding the Inverter. The majority of these
parameters are read-only and are for information purposes
only.
Inputs/Outputs
This option allows access to all the necessary parameters to
configure the following signals:
• Digital inputs
• Digital outputs
• Analog inputs
• Analog outputs
The user can navigate through the various inputs and outputs
to see the current configuration of the inputs and outputs and,
if necessary access the parameters directly to modify their
values. In the example screen opposite, the parameters for
the digital inputs is shown.
Setpoint channels
This option allows the user to display and modify the following
setpoint parameters:
• Frequency setpoint
• Fixed setpoints
• Motor potentiometer
• Torque setpoint
• Jog setpoint
• Frequency limitation
• Ramp-function generator
64
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Intelligent Operator Panel (IOP)