Reverse - Siemens Sinamics G120 Operating Instructions Manual

Reverse

The function of the reverse command is to set the direction of rotation of the motor from its
normal forward motion.
To reverse the direction of the motor, the following actions should be performed:
1. Rotate the Wheel to select "Control".
2. Press the Wheel to confirm selection.
3. The "Control" screen is displayed.
4. Rotate the Wheel to select the "Reverse" option.
5. Press the Wheel to confirm selection.
6. The "Reverse" screen is displayed.
7. Rotate the Wheel to select "On" or "Off".
8. Press the Wheel to confirm the selection.
9. The display returns to the "Control" screen.
10. Press "Esc" to return to the "Status" screen.
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Control
55