Preparations For Jacking - Jeep Renegade 2016 Owner's Manual

1. Open the liftgate.
2. Lift the access cover using the load floor pull strap.
Load Floor Pull Strap
3. Remove the fastener securing the spare tire.
4. Remove the chocks.
5. Remove the jack and wheel bolt wrench.
6. Remove the spare tire.
WARNING!
A loose tire or jack thrown forward in a collision or
hard stop could endanger the occupants of the ve-
hicle. Always stow the jack parts and the spare tire in
the places provided. Have the deflated (flat) tire
repaired or replaced immediately.

Preparations For Jacking

1. Park the vehicle on a firm level surface as far from the
edge of the roadway as possible. Avoid icy or slippery
areas.
WARNING!
Do not attempt to change a tire on the side of the
vehicle close to moving traffic, pull far enough off
IN CASE OF EMERGENCY 479
(Continued)
8