Jeep Renegade 2016 Owner's Manual page 632

630 MULTIMEDIA
make your selection, press the "Auto High Beams"
button on the touchscreen, then choose "Yes" or "No."
• Daytime Running Lights
When this feature is selected, the headlights will turn on
while the engine is running. To make your selection,
press the "Daytime Running Lights" button on the touch-
screen, then choose "Yes" or "No." The button will
highlight indicating that the setting has been selected.
• Cornering Lights
When this feature is selected, if the steering wheel
rotation angle is large or the turn signal indicators are on,
a light (incorporated in the fog light) will turn on, on the
relevant side to improve visibility at night. To change the
Cornering Lights setting, press the "On" or "Off" button
on the touchscreen to select your desired Cornering
Lights setting.
• Flash Lights With Lock
When this feature is selected, the exterior lights will flash
when the doors are locked or unlocked with the Remote
Keyless Entry (RKE) transmitter. This feature may be
selected with or without the Sound Horn on Lock feature
selected. To make your selection, press the "Flash Lights
with Lock" button on the touchscreen, then choose "On"
or "Off."
• Steering Directed Headlights — If Equipped
When this feature is selected, the headlights turn relative
to a change in direction of the steering wheel. To make
your selection, press the "Steering Directed Headlights"
button on the touchscreen, then choose "On" or "Off."
• Headlights With Wipers — If Equipped
When this feature is selected, and the headlight switch is
in the AUTO position, the headlights will turn on ap-
proximately 10 seconds after the wipers are turned on.