Jeep Renegade 2016 Owner's Manual page 607

mode, press and release the preferred setting and make
your selection. Once the setting is complete, either press
the Back Arrow button on the touchscreen or the Back
button on the faceplate to return to the previous menu or
press the "X" button on the touchscreen to close out of
the settings screen. Pressing the Up or Down Arrow
buttons on the right side of the screen will allow you to
toggle up or down through the available settings.
NOTE: All settings should be changed with the ignition
in the "MAR/RUN" position.
Display
After pressing the "Display" button on the touchscreen
the following settings will be available.
• Display Mode
When in this display you may select the "Auto" or
"Manual" display settings. To change Mode status, press
and release the "Auto" or "Manual" button on the
touchscreen.
• Brightness
When in this display, you may select the overall screen
brightness with the headlights on or off. Adjust the
brightness with the "+" and "–" setting buttons on the
touchscreen or by selecting any point on the scale be-
tween the "+" and "–" buttons on the touchscreen.
• Language
When in this display, you may select one of multiple
languages (English/Español/Français) for all display no-
menclature, including the trip functions and the naviga-
tion system (if equipped). Press the "Language" button
on the touchscreen, then press the desired language
button on the touchscreen.
MULTIMEDIA 605
11