Flash-To-Pass; High Beams - Jeep Renegade 2016 Owner's Manual

Headlight Delay Disable
The feature is disabled by turning on the headlights, the
parking lights or by placing the ignition in the MAR/
RUN position.
If you shut off the lights before the ignition is turned on,
they will turn off in the normal manner.
NOTE: The lights must be turned off within two minutes
of placing the ignition in the STOP/OFF position to
activate this feature.

Flash-To-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will cause the headlights to turn on at high beam and
remain on until the lever is released.
GETTING TO KNOW YOUR VEHICLE 97

High Beams

To turn on the high beam headlights, push the turn signal
lever forward (toward the front of the vehicle) and an
indicator will illuminate in the cluster. To turn off the
high beams, pull the turn signal lever rearward (toward
the rear of the vehicle).
High Beam And Turn Signal Controls
4