Jeep Renegade 2016 Owner's Manual page 628

626 MULTIMEDIA
change the LaneSense Strength status, Press the
"LaneSense Strength" button and select from the "Low,"
"Medium" or "High" buttons.
For further information, refer to "Lane Departure Warn-
ing (LDW)" in "Starting And Operating."
• ParkSense — If Equipped
The ParkSense system will scan for objects behind the
vehicle when the transmission shift lever/gear selector is
in REVERSE and the vehicle speed is less than 11 mph (18
km/h). It will provide an alert (audible and/or visual) to
indicate the proximity to other objects. The system can be
enabled with Sound Only, or Sound and Display. To
change the ParkSense status, press and release the "Off,"
"Sound Only," or "Sound & Display" button. Refer to
"ParkSense" in "Starting And Operating" for system
function and operating information.
Refer to "ParkSense Rear Park Assist" in "Starting And
Operating" for system function and operating informa-
tion.
• Front ParkSense Volume — If Equipped
Front Park Assist chime volume settings can be selected
from the EVIC or Uconnect System (if equipped). The
chime volume settings include "LOW," "MEDIUM," and
"HIGH." The factory default volume setting is MEDIUM.
• Blind Spot Alert — If Equipped
When this feature is selected, the Blind Spot Alert feature
can be set to Off, Lights or Lights and Chime. The Blind
Spot Alert feature can be activated in Lights mode. When
this mode is selected, the Blind Spot Monitor (BSM)
system is activated and will only show a visual alert in
the outside mirrors. When Lights & Chime mode is
activated, the Blind Spot Monitor (BSM) will show a
visual alert in the outside mirrors as well as an audible
alert when the turn signal is on. When Off is selected, the