Jeep Renegade 2016 Owner's Manual page 286

284 SAFETY
Enhanced Accident Response System Reset
Procedure
After the event occurs, when the system is active, a
message regarding fuel cutoff is displayed. Turn the
ignition switch from ignition AVV/START or MAR/
ACC/ON/RUN to ignition STOP/OFF/LOCK. Care-
fully check the vehicle for fuel leaks in the engine
compartment and on the ground near the engine com-
partment and fuel tank before resetting the system and
starting the engine.
Depending on the nature of the event the left and right
turn signal lights, located in the instrument panel, may
both be blinking and will continue to blink. In order to
move your vehicle to the side of the road, you must
follow the system reset procedure.
Customer Action
1. Turn Ignition OFF.
(Turn Signal Switch Must
Be Placed In Neutral
State).
2. Turn Ignition ON.
3. Turn Right Turn Signal
Switch ON.
4. Turn Left Turn Signal
Switch ON.
5. Turn Right Turn Signal
Switch ON.
Customer Will See
Left Turn Light Is OFF.
Right Turn Light
BLINKS.
Right Turn Light Is ON
SOLID. Left Turn Light
BLINKS.
Left Turn Light Is ON
SOLID. Right Turn Signal
Light BLINKS.
Right Turn Light Is ON
SOLID. Left Turn Light
BLINKS.