Jeep Renegade 2016 Owner's Manual page 627

experience, select the Near setting. This warns you of a
possible collision when you are much closer to the
vehicle in front of you. To change the FCW+ status, press
the "Fwd Collision Warning" button and select the
"Near" or "Far" button.
• Forward Collision Warning-Plus (FCW+) Active
Braking — If Equipped
The FCW+ system includes Advanced Brake Assist
(ABA). When this feature is selected, it will apply the
brakes to slow your vehicle in case of potential forward
collision. The ABA applies additional brake pressure
when the driver requests insufficient brake pressure to
avoid a potential frontal collision. The ABA system
becomes active at 5 mph (8 km/h). To change the Active
Braking status, press the "Active Braking" button and
select the "On" or "Off" button.
For further information, refer to "Forward Collision
Warning-Plus (FCW+) With Mitigation" in "Safety."
• LaneSense Warning — If Equipped
When this feature is selected, it sets the distance at which
the steering wheel will provide feedback for potential
lane departures. The LDW sensitivity can be set to
provide either an "early," "medium," or "late" warning
zone start point. To change the LaneSense Warning
status, press the "LaneSense Warning" button and select
from the "Early," "Med," or "Late" buttons.
For further information, refer to "LaneSense Warning
(LDW)" in "Starting And Operating."
• LaneSense Strength — If Equipped
When this feature is selected, it sets the strength of the
steering wheel feedback for potential lane departures.
The amount of directional torque the steering system can
apply to the steering wheel to correct for vehicle lane
departure can be set at "Low," "Med" or "High." To
MULTIMEDIA 625
11