Trailer Sway Control (Tsc); Dynamic Steering Torque (Dst) - Jeep Renegade 2016 Owner's Manual

Hide thumbs Also See for Renegade 2016:
Table of Contents

Advertisement

Trailer Sway Control (TSC)

TSC uses sensors in the vehicle to recognize an exces-
sively swaying trailer and will take the appropriate
actions to attempt to stop the sway. The system may
reduce engine power and apply the brake of the appro-
priate wheel(s) to counteract the sway of the trailer. TSC
will become active automatically once an excessively
swaying trailer is recognized.
NOTE: TSC cannot stop all trailers from swaying. Al-
ways use caution when towing a trailer and follow the
trailer tongue weight recommendations. Refer to "Trailer
Towing" in "Starting And Operating" for further infor-
mation. When TSC is functioning, the "ESC Activation/
Malfunction Indicator Light" will flash, the engine power
may be reduced and you may feel the brakes being
applied to individual wheels to attempt to stop the trailer
from swaying. TSC is disabled when the ESC system is in
the "Partial Off" mode.
WARNING!
If TSC activates while driving, slow the vehicle
down, stop at the nearest safe location, and adjust the
trailer load to eliminate trailer sway.

Dynamic Steering Torque (DST)

The DST function uses the integration of the ESC system
with the electric power steering to increase the safety
level of the whole car. In critical situations (understeer-
ing, oversteering, braking with different grip conditions),
through the DST function the ESC system controls the
steering to implement an additional torque contribution
on the steering wheel, to suggest the most correct ma-
neuver to the driver. The coordinated action of brakes
and steering increases the safety and car control feeling.
NOTE: The DST is a driving aid system and does not
replace the driver's actions while driving the car.
SAFETY 255
6

Advertisement

Table of Contents
loading

Table of Contents