Hpe Integrity Nonstop X Ns7 Cg X2 System; Characteristics Of The Ns7 Cg X2 - HP Integrity NonStop X NS7 Planning Manual

5 HPE Integrity NonStop X NS7 CG X2 System

The L16.05 RVU introduces the NonStop X NS7 carrier-grade (CG) system which is used in
Central Office and telecommunication environments. The NS7 CG X2 uses a seismic rack with
DC input power along with
is shown in the
Table 8 Characteristics of the NS7 CG X2
Processor/Processor model
Supported RVU for the system
2-, 4-, and 6-core software
licensing options
CLIM DVD (Minimum DVD
version required for RVU)
Rack
Processors
Memory
Kernel Managed Swap Facility
Maximum CLIMs in a 16 CPU
NS7 CG system
Minimum CLIMs for
fault-tolerance
Maximum SAS disk enclosures
per Storage CLIM pair
Maximum SAS disk drives
Tape support through Storage
CLIMs
ESS support through Storage
CLIMs
Core licensing file
Maintenance LAN
Minimum NonStop System
Consoles for fault-tolerance
Connection to NonStop X
Cluster Solution
NS7 CG X2 standard and optional
example NS7 CG X2 system
Intel Xeon x86 processors
L16.05 and later RVUs
The core license file is required; see
See the CLuster I/O Module (CLIM) Software Compatibility Guide for supported
version.
NOTE: This file is preinstalled on new systems.
36U
2 to 16 processors configured in pairs
64GB, 128GB, and 192GB memory configurations
See Planning Kernel Managed Swap (KMS) Space (page
16 CLIMs without NSADI
15 CLIMs with NSADI
2 Storage CLIMs
2 Networking CLIMs (IP or Telco)
A Storage CLIM pair supports a maximum of 4 SAS disk enclosures
96 per Storage CLIM pair
HPE LTO6 Tape Data Cartridge and HPE NonStop BackBox VTC
HPE XP 7 Storage Array and HPE XP P9500 Storage Array
This file is required; see
Redundant configuration only
2
Supported
hardware. A system configuration
configuration.
Core Licensing (page 9)
Core Licensing (page 9)
59).
61