Sony DVS-9000 User Manual page 56

To apply the cross-point hold attributes
1
2
3
To apply the effect dissolve attribute
1
2
To apply the auto transition attribute
Press [Auto Transition], turning it on.
To apply the GPI output attribute
1
2
For details of attributes, see "Snapshots" in Chapter 1 (Volume 1).
56
Snapshot Operations in the Menus
Press [Xpt Hold], turning it on.
The Snapshot>Attribute>Xpt Hold menu appears. The status area shows a
list of the currently selected regions and bus names.
To select the desired register, press the register number or register name in
the status area, or turn knob 2.
Knob Parameter
2 Bus
Press [On].
This enables cross-point hold on the selected bus or buses.
To switch cross-point hold off, press [Off].
Press [Effect Dissolve], turning it on.
Turn knob 2 to set the effect dissolve duration.
Knob Parameter
2 Duration
Press [GPI Output], turning it on.
Turn knob 2 to set the port number.
Knob Parameter
2 GPI Out
Port
Adjustment
Bus name selection
Adjustment
Dissolve duration
Adjustment
GPI output port number
Setting values
–
Setting values
0 to 999 (frames)
Setting values
1 to 8