Sony DVS-9000 User Manual page 24

• To move the edit point to a keyframe specified by number, press the [GO TO
KF/TC] button, turning its LED on, then enter the keyframe number with the
numeric keypad in the numeric keypad control block, and press the [ENTER]
button to confirm.
• To move the edit point to a specified timecode, press the [GO TO KF/TC]
button, turning its LED off, then enter the timecode value with the numeric
keypad in the numeric keypad control block, and press the [ENTER] button
to confirm.
Entering a difference value
When moving to a point specified with the [GO TO KF/TC] button, you can
also enter the difference from the current keyframe number or timecode value.
Press the numeric keypad +/− button, and enter the difference, then press the
[TRIM] button. Each time you press the +/− button, it toggles between plus (+)
and minus (−).
24
Specifying the Region and Edit Points