Sony DVS-9000 User Manual page 143

• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
Knob
1
2
3
Press [Set].
The Set menu appears.
4
In the <Source/Destination> group, select the tally type.
Src: Return a tally to all sources output to the destination.
Dest: Return a tally to the destination outputting the source to which a
source tally is returned.
5
Set the destination address and level.
The level setting is only required when in step 4 you selected Destination.
Knob
1
2
6
When setting the tally type, set the following parameters.
Knob
3
a) When you selected Group1 to 4 in the section "Setting the tally groups" (page 136), this is
1:R1, 2:G1, 3:R2, 4:G2, 5:R3, 6:G3, 7:R4, and 8:G4.
When you selected Group5 to 8, this is 1:R5, 2:G5, 3:R6, 4:G6, 5:R7, 6:G7, 7:R8, and
8:G8. (R is an abbreviation of "Red Tally," and G of "Green Tally.")
7
Press [Execute].
This makes the parallel tally settings, in accordance with the settings in
steps 1 to 6.
Deleting parallel tally settings
Use the following procedure.
1
In the Router/Tally>Parallel Tally menu, using any of the following
methods, select the parallel tally whose settings you want to delete.
• Press directly on the list appearing in the status area.
Parameter Adjustment
Slot No Parallel tally slot number
Port No Parallel tally port number
Parameter Adjustment
Address Destination address
Level Destination level
Parameter Adjustment
Tally Type Tally type
Setting values
2 to 6
1 to 54
Setting values
1 to 1024
1 to 8
Setting values
1 to 8
Setup Relating to Router Interface and Tally
a)
143