Sony DVS-9000 User Manual page 52

3
4
5
6
52
Snapshot Operations From the Numeric Keypad Control Block
Press the region selection button corresponding to the region for which you
want to save, turning it on. You can select more than one region.
[M/E 1], [P/P]: These select the corresponding M/E-1, and PGM/PST
regions.
[USER 1] , [USER 2]: These select the USER regions.
[DME 1] to [DME 4]: These select DME channels.
[ALL]: This selects all regions.
The first button pressed lights green as the reference region, and any
subsequently pressed buttons light amber.
The display shows the name of the reference region, and the number of the
last register recalled for this region.
Press the [STORE] button, turning it on.
Enter the desired register number from the numeric keypad.
To find an empty register, instead of entering a number, press the period
(.) button. To search for an empty register common to all currently
selectable regions, press the period button again.
Note
If you choose a register which already contains a snapshot, and save a
snapshot, then the existing register contents are overwritten.
The register number appears in the display. If the number is followed by a
letter 'e' or 'E', this indicates the following.
e: The selected register is empty for the regions selected in step 3.
E: The selected register is empty for all currently selectable regions.
The entered register number appears in the display.
To apply attributes, press the following buttons, turning them on.
Attribute to apply Button
Effect dissolve [+/−/EFF DISS] button
Auto transition [CLR/AUTO TRANS] button
For details of attributes, see "Snapshots" in Chapter 1 (Volume 1).
Note
In the numeric keypad control block, it is not possible to apply the cross-
point hold and GPI output attributes. For these, see "Applying snapshot
attributes" (page 55).