Sony DVS-9000 User Manual page 113

2
In the <Show Key Enable> group, press the signal for which "show key"
is enabled, turning it on.
3
To set the time for which "show key" is held, press [Hold Time].
4
Adjust the following parameter.
Knob
1
Settings for DSK auto drop function
Use the following procedure.
1
In the Switcher>Key/Wipe/FM menu, press [DSK Auto Drop].
The DSK Auto Drop menu appears.
2
In the <DSK Auto Drop> group, press one of [DSK1] to [DSK4] for which
you want the DSK to be deleted automatically, turning it on.
Selecting the bank to which the settings apply
For the section "Selecting the key priority operating mode" and subsequent
sections, select the operating bank to which the settings apply using any of the
following methods, then make the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn knob 1 to make the selection.
Knob
1
The selected bank appears in reverse video.
Selecting the key priority operating mode
In the <Key Priority> group of the Switcher>Key/Wipe/FM menu, select one
of the following.
Normal: The key priority sequence can be varied freely.
Fix: Fixed at currently set priority sequence.
Setting the operating mode when the pattern limit is released
In the <Pattern Limit Transition> group of the Switcher>Key/Wipe/FM menu,
select either of the following operating modes.
Parameter Adjustment
Hold Time Show key hold time
Parameter Adjustment
Bank M/E or P/P selection to which settings apply
Setting values
0 to 999 (frames)
Setting
values
1 to 4
Setup Relating to Switcher Processor
113