Sony DVS-9000 User Manual page 27

3
Using image transformations or adding special effects, modify the
keyframe.
4
Press the [MOD] button.
This modifies the keyframe.
Modifying more than one keyframe simultaneously
You can modify a number of keyframes simultaneously. There are three
different cases for this operation.
• Modifying all keyframes after the edit point, or modifying from the edit point
to a particular keyframe
• Modifying all keyframes in the effect
• Modifying the keyframes in a specified range
The different procedures for these cases are now described.
To modify all keyframes after the edit point, or to modify from the
edit point to a particular keyframe
Use the following procedure.
1
Press the [EDIT ENBL] button, turning it on.
2
Stop the effect at the first keyframe of the range to be modified.
3
Carry out the necessary modifications.
4
Press the [FROM TO] button, turning it on.
The display in the numeric keypad control block shows the current
keyframe number, followed by "TO."
To modify all of the subsequent keyframes, skip to step 6.
5
To modify up to a particular keyframe, enter the keyframe number with the
numeric keypad in the numeric keypad control block, and press the
[ENTER] button to confirm.
6
Press the [MOD] button. Alternatively, hold down the [SHIFT] button and
press the [MOD] button.
For the difference in the result, see "Differences in the changes when a
number of keyframes are modified" (page 28).
This makes the modification simultaneously to all keyframes up to the
specified keyframe, or to all keyframes from the edit point.
To modify the keyframes in a specified range
Use the following procedure.
Creating and Editing Keyframes
27