Signaling Details And Configuration - Avaya CS700 Administration And Maintenance

Signaling Details and Configuration

The Configure Signaling Detail screen enables you to view and specify the attributes associated
with the signaling class specified in the Layer 1 Configuration screen.
Select System Maintenance Main Menu > Network Configuration > Trunk (T1/E1)
Configuration > Signaling Details to display
Configure Signaling Detail for E&M Signal Class
+-------------------Configure Signaling Detail (PgUp/PgDn)--------------------+
¦
¦ Trunk 1 (Board 1 Port A)
¦ Wink Time (100-1000 ms): 200
¦ PreWink Delay (0-10 sec.): 1
¦ Collect ANI/DNIS? True
¦ Trunk In-Signaling: WINK
¦ 1 WINK
¦ 2 WINK
¦ 3 WINK
¦ 4 WINK
¦ 5 WINK
¦ 6 WINK
¦ 7 WINK
¦ 8 WINK
¦ 9 WINK
¦ 10 WINK
¦ 11 WINK
¦ 12 WINK
+-------------------------------- ESC to Exit --------------------------------+
When the Signal Class is ISDN, the screen detail looks like this one
:
Configure Signaling Detail for ISDN Signal Class
+-------------------Configure Signaling Detail (PgUp/PgDn)--------------------+
¦
¦ Trunk 1 (Board 1 Port A)
¦
¦ Switch Type:
¦ 0.931 Variant: AT&T Custom
¦
¦
¦
+-------------------------------- ESC to Exit --------------------------------+
Table 26 lists and describes Signaling Details parameters.
Configure Signaling Detail for E&M Signal
Digits(1-40): 10
13 WINK
14 WINK
15 WINK
16 WINK
17 WINK
18 WINK
19 WINK
20 WINK
21 WINK
22 WINK
23 WINK
24 WINK
AT&T 5ESS
Configuring Network Settings
Signal Class E&M
Min Wink (100-1000 ms): 100
Delay Before Dialing (0-5000 ms): 100
Timeout(1000-20000ms): 6000
Trunk Out-Signaling: WINK
1 WINK
2 WINK
3 WINK
4 WINK
5 WINK
6 WINK
7 WINK
8 WINK
9 WINK
10 WINK
11 WINK
12 WINK
Signal Class ISDN
Emulate Network side: NO
Issue 1 November 2008
Class.
¦
¦
¦
¦
¦
¦
13 WINK ¦
14 WINK ¦
15 WINK ¦
16 WINK ¦
17 WINK ¦
18 WINK ¦
19 WINK ¦
20 WINK ¦
21 WINK ¦
22 WINK ¦
23 WINK ¦
24 WINK ¦
¦
¦
¦
¦
¦
¦
¦
¦
141