Terminal Block Configuration; Alarm Contact Configuration - Avaya CS700 Installing Instructions
Audio conferencing server. meeting exchange 4.1
Hide thumbs
Also See for CS700:
- Administration and maintenance (398 pages) ,
- Administration and maintenance (396 pages)
Table of Contents
Advertisement
Installing CS700/CS780 Hardware
Terminal Block Configuration
Alarm Contact Configuration
The alarm contacts are dry relay contacts configured by default to be normally open.
To configure the alarm contacts as NO or NC, follow these steps:
1. Remove the CPU transition card.
2. Observe the field of jumpers labeled with output name and NO and NC positions.
3. Set each output as desired by moving the jumper.
4. Replace the CPU transition card.
62 Installing the CS700/CS780 Audio Conferencing Server
Advertisement
Table of Contents
