System Leds And Internal Health Led Combinations - HP ProLiant DL360 SERIES User Manual

16 HP ProLiant DL360 Generation 4p Server User Guide
Item
15
16
17

System LEDs and Internal Health LED Combinations

When the internal health LED on the front panel illuminates either amber or red,
the server is experiencing a health event. Combinations of illuminated system
LEDs and the internal health LED indicate system status.
The front panel health LEDs indicate only the current hardware status. In some
situations, HP SIM may report server status differently than the health LEDs
because the software tracks more system attributes.
System LED and
Color
Processor failure,
socket X (Amber)
Processor failure,
both sockets (Amber)
PPM failure (Amber)
LED Description
System diagnostic
Online spare
memory
Riser interlock
Internal Health Status
LED Color
Red One or more of the following conditions may exist:
•
•
•
•
•
Amber Processor in socket X is in a pre-failure condition.
Red Processor types are mismatched.
Red PPM has failed.
Status
Refer to the HP Remote Lights-Out Edition II
User Guide on the Documentation CD.
Amber = Failover has occurred. Online spare
memory is in use.
Green = Online spare memory is enabled,
but not in use.
Off = Online spare memory is disabled.
Amber = PCI riser assembly is not seated.
Off = PCI riser assembly is seated.
Processor in socket X has failed.
Processor in socket X failed over to the offline spare.
Processor X is not installed in the socket.
Processor X is unsupported.
ROM detects a failed processor during POST.