Redundant Hot-Plug Ac Power Supply Option - HP ProLiant DL360 SERIES User Manual

8. Connect the battery module cable to the battery-backed write cache enabler
and to the Smart Array 6i memory connector on the system board.
9. Install the access panel ("Installing the Access Panel" on page 28).
10. Power up the server ("Powering Up the Server" on page 25).
Refer to the option documentation for more information.

Redundant Hot-Plug AC Power Supply Option

1. Unfasten the cable management solution to access the power supply bays.
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
Hardware Options Installation 55