Post Problems Flowchart - HP ProLiant DL360 SERIES User Manual

106 HP ProLiant DL360 Generation 4p Server User Guide

POST Problems Flowchart

Symptoms:
•
Server does not complete POST
•
Server completes POST with errors
Possible Problems:
•
Improperly seated or faulty internal component
•
Faulty KVM device
•
Faulty video device
Item
1
2
3
4
5
6
7
NOTE: The server has completed POST when the system attempts to
access the boot device.
Refer to
"POST Error Messages ("POST Error Messages and Beep
Codes" on page 114)" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website (http://www.hp.com/support).
"Video Problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support).
KVM or RILOE documentation
"Loose Connections (on page 97)"
Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms)
Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms)
• "Hardware Problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (http://www.hp.com/support).
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms)