Server Fault Indications Flowchart - HP ProLiant DL360 SERIES User Manual

Server Fault Indications Flowchart

Symptoms:
•
Server boots, but a fault event is reported by Insight Management Agents (on
page 80)
•
Server boots, but the internal health LED or external health LED is red or
amber
Possible causes:
•
Improperly seated or faulty internal or external component
•
Unsupported component installed
•
Redundancy failure
•
System overtemperature condition
Item
1
2
3
4
5
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Refer to
"Management Agents (on page 80)" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation
CD or on the HP website (http://www.hp.com/support).
• "Integrated Management Log (on page 85)" in the HP
ProLiant Servers Troubleshooting Guide located on the
Documentation CD or on the HP website
(http://www.hp.com/support).
• "Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (http://www.hp.com/support).
Server user guide, located on the Documentation CD, or the HP
website (http://www.hp.com/products/servers/platforms)
System Management Homepage at https://localhost:2381
(https://localhost:2381)
"Power-On Problems ("Power-On Problems Flowchart" on page
103)" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
(http://www.hp.com/support).
Troubleshooting 111