8. Install the access panel ("Installing the Access Panel" on page 28).
9. If you are installing DIMMs in an online spare configuration, use RBSU to
configure this feature ("Configuring Online Spare Memory" on page 73).
Hard Drive Options
Removing a Hard Drive Blank (on page 49)
SCSI Hard Drive Guidelines (on page 49)
Installing a SCSI or SATA Hard Drive (on page 50)
Removing a Hard Drive Blank
SCSI Hard Drive Guidelines
When adding SCSI hard drives to the server or drive enclosure, observe the
following general guidelines:
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
Hardware Options Installation
49