Removing The Access Panel - HP ProLiant DL360 SERIES User Manual

a. Press the server rail-release latches and slide the server fully into rack.
b. Secure the server by tightening the thumbscrews.
6. Reconnect the peripheral cables and power cords.

Removing the Access Panel

1. Power down the server if the standard cable management solution is installed
("Powering Down the Server" on page 25).
2. Extend the server from the rack, if applicable ("Extending the Server from
the Rack" on page 26).
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the drives and the internal system components to
cool before touching them.
CAUTION: Do not operate the server for long periods without
the access panel. Operating the server without the access panel results
in improper airflow and improper cooling that can lead to thermal
damage.
NOTE: If the optional cable management arm is installed, you can
extend the server and perform hot-plug installation or maintenance
procedures without powering down the server.
Server Operations 27