System Leds And Internal Health Led Combinations - HP ProLiant ML310 Generation 5p User Manual

Item LED description
DIMM 4 failure
8
DIMM 3 failure
9
DIMM 2 failure
10
DIMM 1 failure
11
Rear fan failure
12

System LEDs and internal health LED combinations

When the internal health LED on the front panel illuminates either amber or red, the server is experiencing a
health event. Combinations of illuminated system LEDs and the internal health LED indicate system status.
NOTE:
provide pre-failure and warranty conditions.
The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM may report
server status differently than the health LEDs because the software tracks more system attributes.
System LED and color Internal health LED
Processor failure
(Amber)
PPM failure (Amber)
DIMM failure, slot X
(Amber)
DIMM failure (all slots,
Amber)
Overtemperature
(Amber)
Fan failure (Amber)
Status
Amber = DIMM has failed or is missing.
Off = Normal
Amber = DIMM has failed or is missing.
Off = Normal
Amber = DIMM has failed or is missing.
Off = Normal
Amber = DIMM has failed or is missing.
Off = Normal
Amber = Rear fan has failed or is missing.
Off = Normal
The system management driver must be installed for the internal system health LED to
Status
color
Red One or more of the following conditions may exist:
•
•
•
Amber Processor is in a pre-failure condition.
Red PPM has failed.
Red
•
•
Amber
•
•
Red
•
•
Red System temperature has exceeded OS cautionary level or
critical hardware level.
Red A required fan has failed.
Processor has failed.
Processor is not installed in the socket.
ROM detected a failed processor during POST.
DIMM in slot X has failed.
DIMM has experienced a multi-bit error.
DIMM in slot X has reached single-bit correctable error
threshold.
DIMM in slot X is in a pre-failure condition.
No valid or usable memory is installed in the system.
The banks are not populated in the correct order.
Component identification 14