POST problems flowchart
Symptoms:
Server does not complete POST
•
NOTE: The server has completed POST when the system attempts to access the boot device.
Server completes POST with errors
•
Possible problems:
Improperly seated or faulty internal component
•
Faulty KVM device
•
Faulty video device
•
Item
Refer to
1
"POST error messages and beep codes"
2
"Video problems" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
(http://www.hp.com/support)
3
KVM or iLO 2 documentation
4
"Loose connections (on page 65)"
5
"Symptom information (on page 65)"
6
Server maintenance and service guide, located on the Documentation
CD or the HP website (http://www.hp.com/products/servers/platforms)
"Port 85 and iLO messages" in the HP ProLiant Servers Troubleshooting
7
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support)
8
"General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website (http://www.hp.com/support)
9
•
•
10
•
•
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support)
Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms)
"Server information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website (http://www.hp.com/support)
"Operating system information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website (http://www.hp.com/support)
Troubleshooting 72