Helpful Hints And Tips - Zanussi ZWF 14380G User Manual

Table of Contents

Advertisement

tention to the water level and tempera-
ture!).
After closing the door, it is necessary to select
the programme and options again and to press
button 6.
At the end of the programme
The machine stops automatically. The three
blinking zeros (
the pilot light of button 6 goes off and after a
few minutes the 8.2 pilot light goes off. The light
8.3 illuminates and some acoustic signals
sound. The door can be opened.
If a programme or an option that ends with wa-
ter left in the tub has been selected, the light
8.2 illuminates and the door remains locked to
indicate that the water must be emptied out be-
fore opening the door.
Stand by : once the programme has finished
after a few minutes the energy saving system
will be enabled. The brightness of the display is

Helpful hints and tips

Sorting out the laundry
Follow the wash code symbols on each garment
label and the manufacturer's washing instruc-
tions. Sort the laundry as follows: whites, col-
oureds, synthetics, delicates, woollens.
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the wash.
New coloured items may run in the first wash;
they should therefore be washed separately the
first time.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special de-
tergent or detergent paste.
Treat curtains with special care. Remove hooks
or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to
treat them prior to washing.
1) do not use acetone on artificial silk
www.zanussi.com
) appear on the display,
Follow the below instructions to empty out the
water:
1. Turn the programme selector dial to Off.
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by press-
ing the relevant button.
4. Press button 6.
At the end of the programme, the door can be
now opened. Turn the programme selector dial
to Off to switch the machine off.
Remove the laundry from the drum and carefully
check that the drum is empty. If you do not in-
tend to carry out another wash, close the water
tap. Leave the door open to prevent the forma-
tion of mildew and unpleasant smells.
reduced. By pressing any button the appliance
will come out of the energy saving status.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a spe-
cial detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab
the stain; treat several times.
Dried grease stains: moisten with turpentine,
lay the garment on a soft surface and dab the
stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with
rust stains which are not recent since the cellu-
lose structure will already have been damaged
and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with ace-
1)
tone
, lay the garment on a soft cloth and dab
the stain.
11

Advertisement

Table of Contents
loading

Table of Contents