Zanussi ZWF 14380G User Manual page 7

the water, please read the paragraph «At the
end of the programme».
Prewash
By selecting this option the machine performs a
prewash cycle before the main wash phase. The
washing time will be prolonged. This option is
recommended for heavily soiled laundry.
Intensive
Select this option for heavily soiled laundry. The
washing cycle intensity will be increased and
the washing time will be prolonged by a few mi-
nutes depending on the type of fabric.
Super Quick
A very short cycle for lightly soiled items or for
laundry which needs only freshening up. We
recommend that you reduce the amount of fab-
ric you load.
Extra Rinse
This appliance is designed to save energy. If it
necessary to rinse the laundry using an extra
quantity of water (extra rinse), select this option.
Some additional rinses will be performed. This
option is recommended for people who are al-
lergic to detergents, and in areas where the wa-
ter is very soft.
Start Pause
This button allows you to start or to interrupt the
selected programme.
Delay Start
The programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up
to a maximum of 20 hours by means of this but-
ton.
Indicator pilot light (8)
8.1
8.2
8.3
www.zanussi.com
After having pressed
the button 6 the light
8.1 (Wash) and 8.2
(Door) illuminate to
indicate that appli-
ance is working and
the door is locked.
The light 8.2 (Door) indicates if the door can
be opened:
• The light is on: the door cannot be opened.
• The light is off: the door can be opened.
• The light is flashing: the door is unlocking
and soon can be opened.
The light 8.3(End) illuminates at the end of the
washing cycle.
5 Display
5.2
5.3
The display shows the following information:
5.1:
• Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes (for example
). The duration is calculated automati-
cally on the basis of the maximum recommen-
ded load for each type of fabric. After the
programme has started, the time remaining is
updated every minute.
• Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for example
(see paragraph «What to do if...»).
• Incorrect option selection
If an option which is not compatible with the
set wash programme is selected, the mes-
sage Err is displayed at the bottom of the
display for a few seconds and the integrated
red light of button 6 start flashing.
• End of programme
When the programme has finished three
flashing zeros (
5.1
) are displayed, the pi-
7