Power On; Printing A Test Page From The Printer Panel - Panasonic KX-PS8000 Setup Manual

Power On

1 Turn ON the scanner, then the printer.
Next turn ON the computer.

Printing a Test Page From the Printer Panel

The test page provides general information on
printer settings and configuration. Make sure the
printer is ready and paper is loaded. Use the
following procedure to print a test page:
1 Press the MENU/EXIT button to enter
the Menu Mode.
Menu Mode
Test Page
2
Press the ENTER button.
Test Page
Configuration Page
3 Press the ENTER button again.
The printer will start printing a configuration
page.
30
2 The scanner will be ready after
approximately 20 seconds, and
"Ready", "PTR Initializing" will be
displayed on the scanner LCD panel.
3
# The READY indicator on the printer
starts flashing and "Initializing" is
displayed on the printer LCD panel.
$ After approximately 3.5 minutes,
the printer's READY indicator is
illuminated and "Ready" is
displayed on the printer LCD panel.
The printer is ready for printing.
Note:
B When you power on your system for the first
"
time, if New Hardware Found" is displayed on
the computer screen, refer to page 32.
(Example)
Panasonic Color Laser Printer
Model Name
: KX-PS8000 Enhanced
Printer Rom Version No. : V043 :
Installed Memory : 016 MBytes
Installed Cassette : Media Tray - A4
< Panel Settings >
System Setting Energy Star
Auto Continue
Data Time Out
Maintenance Page Count
Color Imaging Unit
Transfer Unit
Fuser Unit
Oil Supply Roll
OFFSET
Color Calibration
CYAN
MAGENTA
YELLOW
BLACK
(C) 1996-1998 Kyushu Matsushita Electric Co.,Ltd.
M8C160 (R019)
on
off
off
0000000000
000%
000%
000%
000%
00
00
00
00
00