Panasonic KX-PS8000 Setup Manual page 41

4
If you wish to adjust the density for
B
each color independently, perform the
following, then go to step 5.
# Repeat instructions # through %
of step 1 on page 39.
$ Press the F button.
Color Calibration
CYAN
% Press the ENTER button.
CYAN
0* (-10 to 10)
& Press the F/I button to
darken/lighten the cyan color.
Pressing the F/I button twice selects the
next/previous level setting.
(For example:)
BIf you wish to make the density setting
darker by 4 levels:
 Press the F button 8 times.
BIf you wish to make the density setting
lighter by 2 levels:
 Press the I button 4 times
' Press the ENTER button.
Color Calibration
MAGENTA
( Repeat instructions % through '
for each color
(MAGENTA, YELLOW, BLACK).
BTo skip a color, press the F button.
BTo return to a previous color, press the
I button.
BBefore going to step 5, make sure the
following is displayed.
Color Calibration
Calibration Test Print
5
Press the ENTER button to reprint the
Color Calibration Page.
BThe line enclosure reflects the changes
made to the settings.
BIf you are not satisfied with the current color
density settings, repeat steps 4 and 5
above.
Notes:
BThe color density setting affects the average
life of toner.
BSave the Color Calibration Card for future
calibrations.
41