Installing The Bundled Software - Panasonic KX-PS8000 Setup Manual

Installing the Bundled Software

For Windows 3.1:
BCorel Photo-Paint 5.0 Plus
BTextBridge
BPanasonic font manager (in KX-PS8000 CD-
ROM)
For Windows 95/Windows NT 4.0:
BCorel Photo-Paint 6.0
BTextBridge
BPanasonic font manager (in KX-PS8000 CD-
ROM)
To install the above applications, perform the
following steps.
For Windows 3.1 users:
1
Start Windows 3.1.
2
Quit all applications.
3
Insert the KX-PS8000 CD-ROM into
your computer CD-ROM drive.
Click File from the Program
4
Manager, then click Run... .
5 Click Browse and select your
CD-ROM drive from the [Drives:] box.
6
Select Instapp.exe, and click OK .
7
Click OK .
The installer starts.
8 Follow the instructions on the screen
to complete the installation.
For Windows 95 / Windows NT
4.0 users:
1
Start Windows 95/Windows NT 4.0.
2
Quit all applications.
Insert the KX-PS8000 CD-ROM into
3
your computer CD-ROM drive.
4
Click Start , move the pointer to
Run..., then click Run .
5
Click Browse and select your
CD-ROM drive from the [Drives:] box.
Select Instapp.exe, and click OPEN .
6
7 Click OK .
The installer starts.
8 Follow the instructions on the screen
to complete the installation.
Note:
BIf you are using Windows 95/Windows NT 4.0,
when you insert CD-ROM into your drive, the
bundled application installer may start
automatically. In this case, quit the Panasonic
quick installer and use the application installer.
For information on how to use the applications,
refer to their manuals.
37