Printer - Panasonic KX-PS8000 Setup Manual

Printer

Trouble
READY indicator is blinking.
READY indicator is off.
ERROR indicator is on.
ERROR indicator is blinking.
On the Maintenance Page, a
single color is not uniform or
many vertical streaks (both light
and dark) of slightly different
density and non-uniform color.
On the Maintenance Page, half
tone area has areas of weak
color.
56
Possible Cause
The printer is receiving,
processing or printing job.
You have entered the Menu
mode in the printer panel.
The printer is not ready, is
disabled, or has detected an
error.
Error occurred that is not user-
correctable.
The printer has stopped because
it detected a user-correctable
error such as an open door or a
media jam.
The toner is almost depleted.
Paper doesn't match the
environmental conditions, or it has
too much moisture.
Corrective Action
Wait for the job to be completed
or cancel the job.
Exit the Menu mode by pressing
the MENU/EXIT button.
Read the printer panel message
to determine the printer status.
Turn the printer off and back on
again. If the indicator is still on,
the printer requires service.
Correct the condition displayed
on the printer panel (e.g., close
the door or clear the media jam).
Replace the color toner cartridge.
Try fresh paper, or another type
of paper.
Store media in the original, dust-
free package in the same
environmental conditions as the
printer.