Programmable Functions (On The Base Unit); Bell Selection - Panasonic KX-TCD700BX Operating Instructions Manual

31939_KX-TCD700CX_Czech

Programmable Functions (On the Base Unit)

Bell Selection

There are three choices for Bell Selection when a call is being received
• all handsets ring. "All handsets"
• the selected handset(s) ring(s). "Selected handset(s)"
• the selected handset rings first. Then if it does not answer, all other handsets
will ring, "Selected then all handsets".
The factory pre-set is "All handsets". To change the bell selection, program as follows:
(Standby Mode)
1. Select "all handsets" to
ring.
• Enter PIN (4 digits).
• "All Handset" ringing mode.
or
• A confirmation tone
sounds.
• Display returns to
function menu.
18/6/01 1:54 pm
or
2. Select "selected
handset(s)" to ring.
• Enter PIN (4 digits).
• The current selected
handset flashes.
handset(s).
• A confirmation tone
sounds.
• Display returns to
function menu.
Page 40
or
to select
or
40
or
3. Select "selected
then all handsets"
to ring.
• Enter PIN (4 digits).
• The current selected
handset flashes.
to select handset(s).
or
• The current number of
rings is displayed.
to select no. of rings.
or
• A confirmation tone
sounds.
• Display returns to
function menu.