Select Base Unit - Panasonic KX-TCD700BX Operating Instructions Manual

31939_KX-TCD700CX_Czech

Select Base Unit (

• Automatic Base Unit Access (
The handset automatically selects a registered base unit.
• When the handset moves to another base unit radio area, it loses contact with
the previous base unit and automatically accesses the new base unit.
• If the handset is in the overlap area between several base unit radio areas, the
handset will access the nearest base unit.
• Specified Base Unit Access eg. (
You can only select one registered base unit (1 to 4) you want to operate
( ).
• You can choose the base unit/telephone line where you can make/receive calls.
The factory pre-set is 'Automatic Base Unit Access'. To select the desired base
unit, program as follows:
(Standby Mode)
or
or
or
Note:
• To return to the previous step during programming,
• To exit the programming mode at any time,
18/6/01 1:54 pm
)
or
38
Page 38
)
)
or
.
.
eg. H/set is
registered to Base
1 and 2.
or
• Search for base
unit.
eg. Base 2 is
selected.