Set Base Unit Pin; Cancelling A Handset - Panasonic KX-TCD700BX Operating Instructions Manual

31939_KX-TCD700CX_Czech

Set Base Unit PIN

You can program a 4 digit password for the base unit. The factory pre-set is
0000. Changing the password may prevent the unauthorised use of your unit by
another person.

Cancelling a Handset

Each handset can cancel itself or another handset.
(Standby Mode)
• Set Base Unit PIN.
• Enter PIN (4-digits).
• Enter NEW PIN (4 digits) twice.
• If 2nd entry of NEW PIN
is incorrect, error tone
sounds.
• If 2nd input is correct, a
confirmation tone sounds
and display returns to
function menu.
NOTE: Once you have programmed the password, you
cannot confirm it. We recommend you write down the
password. If you forget it, please consult your nearest
Panasonic Service Centre.
18/6/01 1:54 pm
or
Page 43
or
43
➡
or
• To Cancel a
Handset.
• Enter PIN (4-digits).
• All registered
handset numbers are
displayed.
- to
select the handset to
cancel.
eg. Handset is
selected to cancel.
or
• A confirmation tone
sounds.
• Display returns to
function menu.