TRENDnet TV-IP420P User Manual page 20

TRENDnet User's Guide
Snapshot Click this icon to take a video snapshot
Click once to enable zoom. Then, click and drag
the area on the picture to zoom in. Click once on
Zoom picture for 100% zoom. Click the icon again to
disable zoom. The zoom function works in full
screen mode as well
Click once to start recording. Click it again to
Recording stop recording. The status bar will indicate if it is
in recording state or not
The camera has two video streams: H.264 and
Video Stream MJPEG. Switch to view the different video
streams by clicking this icon
Click the position of the live video, the
corresponding position will be moved to the
center of the live feed. Click and hold the mouse
3D Zoom
for a desire portion of the live image, then that
position will be moved to the center of the live
feed
Click the picture to view in full screen mode.
Full Screen Mode
Double click again or press escape key on your
keyboard to exit full screen mode
© Copyright 2016 TRENDnet. All Rights Reserved.
The status bar shows the status you are at,
Status Bar
including enabled the zoom, recording video,
and successfully taking a snapshot
The icon expands the PTZ control panel
Pan / Tilt / Zoom control panel
movement
Presets
Use the presets panel to move to previously
saved locations
TV‐IP420P
Zoom in / out
Focus close / far
Iris open / close
Speed of pan/tile
20