Alarm Output - TRENDnet TV-IP420P User Manual

TRENDnet User's Guide
Alarm Input
Alarm Input No. Select the alarm input number
Alarm Name Input the alarm name
Alarm Type Two alarm types. NO for (Normally Open) and NC
(Normally Closed).
Normal Linkage
Send Email When the alarm is triggered, the camera will send
an email notification.
Upload Snapshot When the alarm is triggered, the camera will
upload a snapshot to FTP.
Network Storage When the alarm is triggered, the camera will
upload video clip to network storage.
Audible Warning When the alarm is triggered, the camera will have
beep sound.
Notify Surveillance Center When the alarm is triggered, the camera will send
a notification message to the VMS.
Trigger Alarm Output
Select All Select the Alarm output.
PTZ Linking
Preset No. When the alarm input is triggered, the camera
will move to this preset location.
Patrol No. When the alarm input is triggered, the camera
will call this patrol.
Pattern When the alarm input is triggered, the camera
will call this pattern.
Copy to Alarm
Select All Copy the settings to other alarm.
(Note: This option is for the camera that has
multiple alarm output channels.)
Click Save to save the changes
© Copyright 2016 TRENDnet. All Rights Reserved.
Alarm Output
Choose Alarm Input number, name and alarm type. The alarm type could be
NO (Normally Open) and NC (Normally Closed).
Alarm Output
Alarm Output Select the alarm output number
Alarm Name Input the alarm name
Delay: Delay time to trigger the alarm output.
Copy To Alarm
Select All Copy the settings to other alarm.
(Note: This option is for the camera that has
multiple alarm output channels.)
TV‐IP420P
49