TRENDnet TV-IP420P User Manual page 10

TRENDnet User's Guide
5. The installation wizard will list cameras found on your network. If only
one camera is found, it will be selected by default. If you have more than
one camera on the network, please choose the camera you wish to set
up by identifying its MAC address. Select the camera and then click Next.
6. Select the DHCP option to assign IP address dynamically, or select Fixed
IP to assign the camera an IP address, and then click Next.
© Copyright 2016 TRENDnet. All Rights Reserved.
7. If you select Fixed IP, enter the IP address, subnet mask, default gateway,
and DNS server address. Please make sure the IP address you are setting
on the camera is in the same network of the computer that you are using.
Click Next.
TV‐IP420P
10