TRENDnet TV-IP420P User Manual page 45

TRENDnet User's Guide
Enable Check this box to enable tamper detection. Click Save
Tamper to save the settings.
Detection:
Draw Area: Click Draw Area button to start drawing. Click and drag
on the area you want to set up the tamper detection.
You can setup only one area for tamper detection.
Click Stop Drawing to stop drawing motion detection
areas. The gray block represents the detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
© Copyright 2016 TRENDnet. All Rights Reserved.
Arming Schedule
Edit: Click Edit to edit the recording schedule. The Edit
Schedule window will pop up.
1. Select day of the week you want to edit.
2. Select All Day or Customized schedule of the
day.
3. Set the time period and the event you want
to trigger the video recording continuous
(always recording) or motion detection.
4. Click Select All or the weekday you want to
have the same schedule on different day.
5. Click another day of the week by clicking on
its tab to set the next schedule. Click OK
when you have finished your settings.
Notification
Send Email: Check this box to send an e‐mail notification when
motion is detected.
Click Save to save the changes
TV‐IP420P
45