TRENDnet TV-IP420P User Manual page 39

TRENDnet User's Guide
Schedule:
Use quick selection or enter the time down below.
Click OK to confirm the time you want to set.
Start Time: The start time for day mode.
Stop Time: The start time for day mode.
Position adjustments
Mirror:
Choose horizontal, vertical or both to adapt to the
physical position of installation.
© Copyright 2016 TRENDnet. All Rights Reserved.
Image adjustments
Back Light Back light compensation: Setup a fixed light source
Compensation position to compensate and adjust the image in the
and dark.
Wide‐Dynamic‐ Choose the area that you want to enhance (dark area,
Range: not light source).
Note: By default, the WDR is disabled. Please enable WDR
to set up back light compensation.
WDR: Wide Dynamic Range compensates for the dark
area dynamically.

WDR Level: The level of compensation. Range: 0‐
100%, default: 20%.
White Balance:
Digital Noise Choose the mode of noise reduction.
Reduction:
Normal Mode
Noise Reduction Level: Adjust the effect of digital
noise reduction. Range: 0‐100%, default : 100%
Expert Mode
Space DNR Level: Adjust the special digital noise
reduction with adjacent pixels. Change the range (0‐
100%) to change the adjacency effect, default : 50%
Time DNR Level: Adjust the 3D digital noise reduction.
Compare and reduce noise between video frames.
Range: 0‐100%, default : 100%
Click Reset to reset the display adjustments
TV‐IP420P
Choose a color
temperature as the white
color and compensate the
color on the whole image.
39