Cabling - TRENDnet TV-IP420P User Manual

TRENDnet User's Guide
Hardware Installation
Cabling
It's recommended that the wiring the cable in your home or office by a
professional. If you already have the cable deployed, make sure the cable and
the connectors meet the category 5 Ethernet cable standards. At least 2 pairs
of twisted lines are required for power and data. Poor cable quality may cause
unexpected problems. Testing your cable or running a new cable is suggested
for new camera installation.
Waterproof cap
The TV‐IP420P itself is IP66 grade water and dust proof. There is a set of
network cable water proof caps that comes with the package as well. Run
your cable going through the accessories, and then crimp the cable with an
RJ45 module. Plug in the network cable and then tighten the waterproof cap
to prevent water running into camera through the cable.
© Copyright 2016 TRENDnet. All Rights Reserved.
Access your Camera with the Web Browser
System Management and Default Settings
It is recommended that you install your camera with the CD that comes with
the package and use accompanying TRENDnetVIEW Pro software (version
2.5.7 or later) for Windows computers. The software is included on the CD
comes with the package. If you do not have the CD with you, you can go to
http://www.TRENDnet.com/support enter the model number "TV‐IP420P"
and download the software.
Camera Default Settings:
System Default
Management Dynamic assigned if there's a DHCP server on the
IP
network or self‐assigned 192.168.10.30
Administrator admin
name
Administrator admin
password
If you want to access your camera directly instead of using software, you can
follow the steps specified in this chapter to login to your camera. A web
browser plug‐in must be installed to watch video smoothly.
For Windows setup, continue to next paragraph.
For Mac setup, please go to page 15
TV‐IP420P
12